waterproof 600 led 3528 strip light
Features
- 600lumen/per meter High brightness intensity
- Red/Green/Blue/Yellow/Pure White/Warm White available.
- 3pcs LEDs per segment; Can be cut by 3 LED(DC12V)and 6LED (24V)and
- Easy to install, strip continuous connection and strip connection to LED drivers.
- With 3M adhersive tape back,easy for installation.
- Can be changed into waterpoof with type A and typeB.
- Input Voltage DC12V or DC24V.
Application
- Architectural lighting for window ,archway ,canopy and corridor.
- Decorative lights for holiday ,event ,show,exhibition .
- DIY light for home use.
- Backlight or edge lighting for sign.
Dimensions
Connection Drawing
Operation Guidance
- Step A 1 : Pull out the black clip carefully
- Step A 2 : Cut the LED light strip at the mark “scissors” or by every 3 LED’s.
- Step A 3 : Put the light strip in the space between the clip and connector .
- Step A 4 : Push the clip in original position.
- Step B 1 : Pull out the black clip of each side carefully.
- Step B 2 : Pull the flexible led strip in the space between the clip and connector at one side .
- Step B 3 : Put the flexible led strip in the space between the clip and connector at the other side ,and push the clip in original position.
Specification Options
- Color:white|warm white|red|blue|yellow|orange|green|purple|pink
- Waterproof:NON-waterproof,IP65,IP68
- Width:8mm|10mm
- Voltage:12V DC|24V DC
Features
- 300lumen/per meter High brightness intensity
- Red/Green/Blue/Yellow/Pure White/Warm White available.
- 3pcs LEDs per unit; Can be cut by 3 LED(DC12V)and 6LED (24V)and connect again by our accessories.
- With accessories to help strip easy installation, strip continuous connection and strip connection to LED drivers.
- With 3M adhersive tape back,easy for installation.
- Can be changed into waterpoof with type A and typeB.
- Input Voltage DC12V or DC24V.
